Activating a Treo 650 on Verizon

• Warning: The following guide is for information purposes only. Programming your phone may result in damage that could render your phone useless and may void your warrantee. Anyone attempting the following does so at their own risk. There are no guarantees or assumptions of liability for anything that you may do. WRITE DOWN YOUR ORIGINAL SETTINGS!
• Required Hardware
• Sprint Treo 650
  You can buy from PalmOne.com without Sprint Plan
• 2. Treo 650 / Tungsten T5 Serial Cable
  You must make yourself.
• Required Software
• 1. Kyocera Wireless PST Chameleon Version
• 2. BitPim
• 3. Verizon PRL
• 4. Future Dial USB2Serial Driver
• Step 1 :
• Install USB 2 Serial DriverPlug the hand-made Serial Cable in to your computer
• Step 2 :
• Install Chameleon SuiteInstall Kyocera Chameleon Suite
• Step 3 :Enable Passthrough modeTurn on Treo650 and turn on the phone and punch ##3424.
• Step 4 :
• Connect Serial CablePlug the serial cable into Treo 650
  
• Step 5 :
• Install BitPim softwareInstall BitPim software
• Step 6 :
• Change setting of BitPimChange settings of BitPim.
• Step 7
• Find OTKSL and MSL code.
• Step 8 :
• Setting for chameleonChange setting chameleon.
• Step 9 :
• Run ChameleonLaunch Service Programming.
• Step 10 :
• CDMA ProgrammingTreo650 CDMA Programming.
• Step 11 :
• Activate VerizonCall Verizon Customer Service and ask change ESN with your Treo 650. They might deny chaning ESN because the esn is unknown. You must persuade the CS or quibble. During activaing Verizon, CS asked you to call *228 and push 1. Just follow the step. After finishing activating, call *228 again and push 2 to upgrade PRL
  
• Step 12 :
• Change Express Network setting1. Go into Network Preferences --> menu key --> Options --> View Log2. Type in: "pdpset 1" and hit the enter key...then hit done3. Use your new MSL code if asked.4. Create a new service connection...5. Hit menu, select New, and fill in:Service: Express NetworkConnection: High Speed WirelessUser Name: your10digitphonenum@vzw3g.comPassword: vzw6. Click on Details, click off Mobile IP, then OK7. Click on Connect and watch your tower icon change to data mode
• Step 13 :
• Change browser settingGo into phone mode.Enter ##3282 --> DIAL --> Select [menu] --> Browser --> [Modify]Clear both Primary and Secondary NGG's and their ports